Koldlok ®

Raised Floor Tile Grommet Seals

Koldlok grommets can help your computer facility be greener, while increasing your energy savings.

Here is the problem:
Improper sealing of cable openings in a data center allows valuable cold air to escape and contributes to ineffective cooling of IT equipment. The Cold Lock grommet is a sealing solution that increases current cooling unit capacity, reduces equipment heat loads, and raises static pressure under the raised floor.

This improves cool air delivery through perforated tiles or floor grates.

Here is what to expect:
Superior sealing through multiple layers of opposing brush filaments that will eliminate up to 98 percent of bypass airflow.

You can expect to save money by preventing bypass air from escaping through holes in the raised floor tilesInstalling cold lock raises the static pressure under the floor and increases the volume of cold air that is delivered to equipment intakes.

Call us at (404) 321-0556 for more info.

Easy Installation:
Tool free installation requires no down time to install or re cable.cold lock grommets prevent costly bypass airflow. Which is conditioned air that escapes through unsealed cable openings but is not cooling equipment. 

Maximizing the volume of conditioned air flow through perforated tiles and grates is the easiest and lowest cost way to reduce energy consumption and lower air intake temperatures.As much as 50 percent of cold air in the access floor escapes through cable access holes.

Koldlok grommets will significantly increase cooling effectiveness in the data center by preventing cool air from escaping through holes in access floors.

Several grommet styles are available including, Integral, Split Integral, Surface Mount, Extended Brush Grommets, Mini Grommet and, the Wave, a fire-rated grommet.

The Integral Grommet is a flush mount design with a sleeve that protects cable as they pass through the cut in the floor tile.

The Split Integral Grommet is a two piece grommet used along the edge of floor tiles to allow cables to be removed from the tile when sub floor access is needed.

The Surface mount Grommet is a two piece design that covers an existing cable access hole.

The Extended Brush Grommet is one piece and covers a long, narrow slot like those along the edge of a room.

The Mini Grommet is available with or without static dissipation.

Koldlok seals install in new or existing cable pass through holes in raised floors.